User Manual V1.3-2023-01-31
02 Safety Precaution
3
2 Safety Precaution
2.1 General Safety
2.2 DC Side:
Notice
• The information in this document is subject to change due to product updates or other
reasons. This manual cannot replace the product labels or the safety precaution unless
otherwise specied. All descriptions here are for guidance only.
• Before installations, read through the user manual to learn about the product and the
precautions.
• All installations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
• Use insulating tools and wear personal protective equipment when operating the
equipment to ensure personal safety. Wear anti-static gloves, cloths, and wrist strips when
touching electronic devices to protect the inverter from damage.
• Strictly follow the installation, operation, and conguration instructions in this manual. The
manufacturer shall not be liable for equipment damage or personal injury if you do not
follow the instructions. For more warranty details, visit https://en.goodwe.com/warranty.
asp.
Notice
The inverters are designed and tested strictly in compliance with related safety rules. Read
and follow all the safety instructions and cautions before any operations. Improper operation
might cause personal injury or property damage as the inverters are electrical equipment.
DANGER
Connect the DC cables using the delivered DC connectors and terminals. The manufacturer
shall not be liable for the equipment damage if other connectors or terminals are used.
WARNING
• Ensure the component frames and the bracket system are securely grounded.
• Ensure the DC cables are connected tightly and securely.
• Measure the DC cable with the multimeter to avoid reverse polarity connection. Also, the
voltage should be under the permissible range.
• The PV modules used with the inverter must have an IEC61730 class A rating.
• If there are more than 3 PV strings on input side, an additional fuse installation will be
suggested.
• When exposed to sunlight, the PV array will generate very high voltage which can cause
electrical shock hazard. Please strictly follow the instruction we provided.
To Next Page
Loading...
Need help?
General