Graco Simulation XM Repair Parts

Repair
3A2989V 23
Dosing Valve Assembly
1. Follow Pressure Relief Procedure, page 7.
2. Disconnect all fluid lines from dosing valves (28 or
29). See F
IG. 6.
3. Remove two bolts (31) securing dosing valve to
bracket.
4. Unscrew dosing valve nipple fitting (36 or 37) from
dosing valve outlet.
5. Disconnect pressure sensor (831) from dosing
valve. See page 74.
6. Remove dosing valves.
7. See Ratio Control Valve Assemblies (28, 29) on
page 74 for disassembly illustration.
8. Follow steps in reverse order to reassemble dosing
valve assembly. See Ratio Control Valve Assem
blies (28, 29) on page 74 for assembly illustration
and specifications.
FIG. 6
29
28
55
55
54
85
31
37
36

Graco Simulation XM Specifications

General

Brand	Graco
Model	Simulation XM
Category	Paint Sprayer
Language	English