21
Technical Information
Service Manual
(2) Set preset name
Step 1: Tap at the top right corner of the homepage "Device". Select "Add preset" and enter the page "Preset edit".
Step 2: Choose the time. Tap "Name". As shown in the picture, its name is "baby room". For timer type, select "On". Then select the repeating
days. Save the setting of preset name.
(3) Set device image
Please refer to step 1 in 2(1)
3.Control functions
(1) Common control functions: General control on the operation of smart devices (On/Off, temperature, fan speed, mode, etc.) and the setting
of advanced functions (air exchange, dry, health, light, sleep, energy saving upper limit).
Step 1: General control Enter the homepage "Home control" rst. Take "baby home"as an example.
Tap "babyroom" and enter the page of air conditioner control. Tap to turn on the control switch.
To Next Page
Loading...
Need help?
General
