30
Technical Information
Service Manual
6.3 Operation of Smart Control (Smart Phone, Tablet PC)
Operation Instructions
NOTE:One AC can be controlled by 4 cell phone in maximun at the same time.
2.Short-distance and long-distance control setting for air conditioner connecting router Step 1: Under short-distance control, return
to the homepage "Home Control". Tap at the top right corner of the homepage "Home control". Select "Add device"and enter the
page of "Add device". Tap "Manual conguration" and enter the page "Manual conguration".
Step 2: Select the correct network name and enter the password,select the server (The server setting here must keep the same
as the server setting in "Settings" mentioned below.Otherwise, remote control will be failed.),then tap the button "Add device" for
conguration. If conguration succeeds, App will notify user that conguration is successful and return to homepage.
Download and install APP
Scan the following QR code with your smart phone and download Wi Smart.
Conguration
Before operation, please nish the following conguration in order to realize Wi control and the connection between air conditioner and
intelligent device.
1.Short-distance control setting for air conditioner using wi hotspotStep 1: Air conditioner wi is set to AP mode in factory. You can
search the air conditioner wi hotspot through your smart phone. The name of wi hotspot is the last 8 numbers of the air conditioner
mac address. Password is 12345678.
Step 2: Open App and the screen will show the air conditioner that you just connected. Click this air conditioner to enter and realize
short-distance control, as shown below. Please refer to "Functions introduction" for specic control methods.
Install the App according to its guidance. When successfully installed, your smart phone homepage will show this icon
To Next Page
Loading...
Need help?
General
