The inverter may only be operated with a permanent connection to the public power
grid. The inverter is not intended for mobile use. Any other or additional use is not
considered the intended use. The manufacturer/supplier is not liable for damage
caused by such unintended use. Damage caused by such unintended use is at the sole
risk of the operator.
PV modules Capacitive Discharge Currents
PV modules with large capacities relative to earth, such as thin-film PV modules with
cells on a metallic substrate, may only be used if their coupling capacity does not
exceed 1uF. During feed-in operation, a leakage current flows from the cells to earth,
the size of which depends on the manner in which the PV modules are installed (e.g.
foil on metal roof) and on the weather (rain, snow). This "normal" leakage current
may not exceed 50mA due to the fact that the inverter would otherwise automatically
disconnect from the electricity grid as a protective measure.
2.2 Qualification of skilled person
This grid-tied inverter system operates only when properly connected to the AC
distribution network. Before connecting the MIN TL-X to the power distribution grid,
contact the local power distribution grid company. This connection must be made only
by qualified technical personnel to connect, and only after receiving appropriate
approvals, as required by the local authority having jurisdiction.
2.3 Safety instruction
The MIN TL-X Inverters is designed and tested according to international safety
To Next Page
Loading...
Need help?
General