7 Commissioning
Do not disconnect the DC connectors under load.
Improper operation during the wiring process can cause fatal injury to
operator or unrecoverable damage to the inverter. Only qualified
personnel can perform the wiring work.
Damage to the inverter due to moisture and dust penetration
Make sure the cable gland has been tightened firmly.
If the cable gland are not mounted properly, the inverter can be
destroyed due to moisture and dust penetration. All the warranty
claim will be invalid.
Requirements：
The AC cable is correctly connected.
The DC cable is correctly connected.
The communication cable is correctly connected.
The country is set correctly.
7.1 Start the inverter
7.1.1 Touch control
Switch display or Number
+1
Confirm country setting or
Number recover defaut
value
To Next Page
Loading...
Need help?
General