5.3.2 Fixed the inverter on the wall
Falling equipment can cause serious or even fatal injury, never mount
the inverter on the bracket unless you are sure that the mounting
frame is really firmly mounted on the wall after carefully checking.
Rise up the inverter a little higher than the bracket. Considered the weight of
them.During the process please maintain the balance of the inverter.
Hang the inverter on the bracket through the match hooks on bracket.
After confirming the inverter is fixed reliably, fasten one M6 safety-lock sockets
head cap screws on the right or left side firmly to prevent the inverter from being
lifted off the bracket.
To Next Page
Loading...
Need help?
General