Haier LT19M1CW User Manual

WARNING
• Misuse or modification of this appliance may result in breakdown or injury.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
IMPORTANT INFORMATION
• The appliance is intended for household use only.
• The appliance should always be turned to OFF before plugging or unplugging from socket. Never
yank cord to disconnect from socket; instead, grasp plug and pull to disconnect.
• Check that the voltage on the rating plate of your product corresponds with your local electricity
supply which must be A.C. (Alternating Current).
• If the mains sockets in your home are not suitable for the plug supplied with this product, check
with a qualified electrician for replacement.
FOR OPTIMUM PERFORMANCE
• Do not use in environments which are extremely hot, cold, dusty or humid.
• Keep the unit free from dust and clean with a dry cloth.
• Do not use in areas exposed to direct sunlight or where it can become extremely hot.
•
Avoid placement where there is a lot of movement, vibration or on an unstable surface.
• To reduce the risk of fire or electric shock, the equipment shall not be exposed to rain or moisture
and objects filled with liquids, such as vases, shall be placed on the apparatus.
•
To avoid fire, no naked flame source, such as lit candles, should be placed on or around the unit.
• FFor ventilation, leave at least 10 cm free all around the TV. Do not place the TV on a carpet.
• The ventilation holes must be kept clear from obstructions.
• In case of smoke, or unusual noises or smells coming from the unit, switch it off, unplug it from
the wall socket and contact your dealer or service center.
• Place the TV in such a position that the screen is not exposed to direct sunlight. It is best to have
soft indirect lighting whilst watching TV. Avoid dark environments and screen reflection as these
may cause eye fatigue.
• When the TV has been moved from a cold place, it will need time for the moisture from inside to
evaporate.
•
The appliance coupler is used as the disconnect device of this apparatus, the disconnect device
shall remain readily operable.
IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before use and keep for future reference.
• Keep away from sources of strong magnetism - such as speakers.
• The equipment shall not be exposed to dripping or splashing.
•
The apparatus must be connected to a mains socket outlet with a protected earthed connection.

Haier LT19M1CW Specifications

General

HD type	WXGA
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1440 x 900 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	170 °
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	160 °
Supported graphics resolutions	1440 x 900 (WXGA+)
Manual	Yes
Package weight	5000 g
RS-232 ports	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Common interface Plus (CI+)	No
Number of OSD languages	14
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, ITA, NOR, POL, POR, RUS, SWE
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	110 - 230 V
Power consumption (standby)	1 W
Power consumption (typical)	45 W
RMS rated power	6 W
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-T

Weight and Dimensions

Depth (with stand)	95 mm
Width (with stand)	455 mm
Height (with stand)	308 mm
Weight (with stand)	4000 g