Haier LT19M1CW User Manual

The following table contains common problems and the solutions to these problems.
Please check this list before you contact technicians.
Abnormal colours
Twisted picture
TROUBLESHOOTING
Problems
No picture
Picture too dark
Audio only, no images
Picture only, no audio
Cannot use remote control
Cannot receive sufficient
channels through antenna
No colours
1. Connect power cord correctly.
2. Turn on power.
3. Connect signal cable correctly.
4. Press any button on the LCD TV.
Connect signal cable correctly.
1. Connect signal cable correctly.
2. Please use compatible signal.
Adjust brightness and contrast.
Audio only, no images
1. Please check if input signal is connected correctly.
2. TV-RF signal must not be lower than 50dB.
1. Connect signal cable correctly.
2. Adjust volume to proper level.
3. Connect audio signal cable correctly.
4. TV-RF signal must not be lower than 50dB.
1. Please change battery.
2. Turn off power for 10 seconds; and then restart power.
Please use the Channel scan function to increase the number
of channels not included in memory.
Please adjust the colour setup.
1. Check the connection of antenna/signal cable.
2. Check if channel is in play mode.
3. Press signal source and change input mode.
Adjust antenna.
Keep the TV away from noise sources, such as vehicles, neon
lights, and hair dryers.
Please use the Update scan method to add the channels not
included in memory.
Please use multi-directional outdoor antenna. (If your TV is
subject to the influence of nearby mountains or buildings).
If the item you choose turns grey, that item cannot be selected.
Please use the Update scan method to add the channels not
included in memory.
Sloutions
Blinking picture accompanied by
ghost image
Broken lines or segments
Certain TV channels are blocked
(Hope to acquire some channels)
Overlapping images or ghost
images
Cannot use a function
Cannot receive programs
HD Ready Digital LCDTV User Manual
36

Haier LT19M1CW Specifications

General

HD type	WXGA
Display diagonal	19 \
Display brightness	250 cd/m²
Display resolution	1440 x 900 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	170 °
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	160 °
Supported graphics resolutions	1440 x 900 (WXGA+)
Manual	Yes
Package weight	5000 g
RS-232 ports	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Common interface Plus (CI+)	No
Number of OSD languages	14
On Screen Display (OSD) languages	DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, ITA, NOR, POL, POR, RUS, SWE
Product color	Black
LED indicators	Y, Stand-by
Panel mounting interface	100 x 100 mm
AC input voltage	110 - 230 V
Power consumption (standby)	1 W
Power consumption (typical)	45 W
RMS rated power	6 W
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-T

Weight and Dimensions

Depth (with stand)	95 mm
Width (with stand)	455 mm
Height (with stand)	308 mm
Weight (with stand)	4000 g