7
HARDI
®
FOAM MARKER STANDARD VERSION
2.0 SAFETY
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol on your machine or in this manual, be alert
to the potential for personal injury.
Follow recommended precautions and safe operating practices.
PTO driven machinery can cause serious injury. Before working on or
near the PTO shaft, or servicing or cleaning the driven machine, put the
PTO lever in the DISENGAGE position and STOP the engine.
CAUTION: Foam Marker tank contents are under pressure. Open
fi ll caps slowly and allow air pressure to be released
before removing the cap. (Fig. 3)
NOTE: Replace only with vented HARDI
®
replacement cap
(#10453603.)
Tank Decal
Fig. 3
CAUTION
CONTENTS UNDER PRESSURE
OPEN CAP SLOWLY
Remove cap prior to servicing tank. If lost or
damaged, replace only with vented HARDI
®
replacement cap #10453603.
10533603
!
To Next Page
Loading...
Need help?
General
