4 - System setup
35
Initial Start-up
General info
An Initial Setup wizard is presented on start-up.
÷
NOTE! Not all of the following parts may be required to follow - it depends on your specific setup.
Once the wizard is completed, it is not shown again unless the display memory is cleared.
Advanced Options
Press “Advanced” button on Language Selection
screen (first screen to appear on initial start-up).
Select:
• Restore Backup
• Upgrade Firmware
• Unlock Display Features
÷
NOTE! Using the Restore backup option is
not the proper method to get multiple
displays set up to be the same. Use the
AGSETUP file.
It is acceptable to complete the initial setup wizard
and then upgrade. Setup information will not
change.
• On a “clean” display going out for service, to
stand in for a failed display, the customer
should use the Restore backup option in the
initial setup wizard.
Display Setup: Select Language
Language
English/US
Advanced
Feature
Unlocks
Upgrade
Restore
Restore data from a backup file (same display model only)
Upgrade the display firmware.
Unlock display features.
Advanced Options
To Next Page
Loading...
Need help?
General
