3. Turn on the Bluetooth compatible device and enter pairing mode.
"JBL AURA"
1. Power ON the unit.
Or press BT button on Remote Control.
4. After successfully pairing and connecting, the "BT" on display will stop blinking.
"JBL AURA"
17 BLUETOOTH OPERATION
18
5. During playback:
~ Press the button on the Remote Control or button on the front panel to play or pause.
ററ
2. Press the button repeatedly until "BT" appears on display and blinks.
NOTE: After first time pairing, the AURA will connect to the last paired Bluetooth Device when both are within
working range.
18
OPERATION
When the Bluetooth device finds the AURA,
will appear on the display of the device.
~ Press the or button on the Remote Control or or button on the front panel to skip to previous or
next track.
Play your Bluetooth device outside while watching TV inside!!
1. Power ON the unit.
3. The currently paired Bluetooth device will play in the selected Zone independently of the other speaker zone(s).
4. Use your device's controls for volume level and content selection.
R
2. Press and hold either the Zone B or Zone C button on the front panel or the Remote control for 2 seconds and
release.
6. To pair to another Bluetooth Device, disconnect the current paired device by pressing the button on the
front panel or on the Remote Control. The AURA now can be discovered by other Bluetooth devices.
5. To cancel, press the selected zone button.
To Next Page
Loading...
Need help?
General
