Harman JBL AURA WALL MOUNT STEREO User Manual

RESTORE FACTORY SETTINGS
USB
AUX 1 HDMI IN
Reset
20
By restoring the default settings defined at the factory, you remove
all personalized settings from the AURA Wall Mount Stereo.
LEARN OPERATION
19
Control the AURA with another Remote Control
(Available only for the Power, Volume Up, Volume Down and Mute functions.)
1. Power ON the unit.
4. Repeat Step 3 for Volume+, Vol- and functions.
2. Press and hold the LEARN button on the Remote Control for 2 seconds and release. "LEARN" appears
on the display.
3. Press the button on the AURA Remote Control. "POWER" flashes on the display. Press the Power button
on your other remote control and "POWER" disappears from the display.
5. Press and hold the LEARN button on the Remote Control for 2 seconds and release to exit from the
LEARN mode.
1. Power ON the unit.
2. Adjust volume level to minimum.
3. Insert a straightened paper clip or toothpick into the Reset hole.
Press on the button at the back of the hole until the AURA is restored
to the factory setting.
19

Harman JBL AURA WALL MOUNT STEREO Specifications

General

Brand	Harman
Model	JBL AURA WALL MOUNT STEREO
Category	Stereo System
Language	English