Changing the Default Display
Page 3
Step 1
Step 2
Step 3
Step 4
If the first reading is showing as a number followed by a ‘P’, then the default
reading has been changed to express the ‘Desired Output %’.
Continue moving the switch up to ‘Super Chlorinate’ and back
to ‘Auto’ until the unit reads ‘AL-0’.
To change the default reading back to the average salt, start by
pressing the ‘Diagnostics’ button one time.
When the unit reads ‘AL-4’ move the switch up to ‘Super
Chlorinate’ and back to ‘Auto’.
It takes about 30 seconds for the unit to settle back to the
default reading. The reading should now reflect the average
salt level.
To Next Page
Loading...
Need help?
General
