Trail Camera M15 User Manual
15
Chapter 4 System Settings
4.1 GPS Service
You can enable GPS Service to get the real-time device location. If you turn off GPS service, the
location coordinates for pictures/videos and real-time device location will be unavailable.
Zoom in the map by tapping , and zoom out the map by tapping .
4.2 Set Date Format
Go to Device Settings and tap Date Format. MM-DD-YY and DD-MM-YY are selectable.
4.3 SD Overwriting Cycle
SD Overwriting Cycle helps to manage the SD card capacity. Tap
to enable this function.
On
The earliest files stored in the SD card will be deleted automatically when the SD card
capacity will be full.
Off
The device will shut down if the SD card capacity is full.
4.4 View Device Information
Tap Device Details to enter the device information interface, then you can view the device
information such as release date, SIM ID, remote control mode, SD card capacity, etc. You can also
view some of the information on home page.
Figure 4-1 View Device Information
To Next Page
Loading...
Need help?
General