HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 33
Configuring Timing Tasks
Purpose:
A timing task is a preconfigured action that can be performed automatically at a specific date and time.
1. Move the cursor to enter the TIMING TASK submenu: MAIN MENU > DOME SETTINGS > TIMING TASK.
Figure 18, Time Task Configuration Menu
2. Choose the task number.
A. Move the cursor to TASK NUM and click IRIS+ to enter the editing mode.
B. Click the up/down direction buttons to select the number of the task which is to be configured.
C. Click IRIS+ again to confirm the settings and exit the editing mode.
NOTE: Up to eight time tasks can be configured.
3. Set the task status.
A. Move the cursor to ENABLE TASK and click IRIS+ to enter the editing mode.
B. Click the up/down direction buttons to set the task status as ON.
C. Click IRIS+ again to confirm the settings and exit the editing mode of this column.
NOTE: If the task action and task time have not been configured, you cannot set the status to ON.
4. Configure the task action.
A. Move the cursor to TASK ACT and click the IRIS+ to enter editing mode.
B. Click the up and down direction buttons to select the task action from preset 1 to 8, pattern 1 to 5,
patrol 1 to 10, pan scan, tilt scan, panoramic scan, day mode, night mode, zero calibrate, and
none.
C. Click IRIS+ again to confirm the settings and exit editing mode of this column.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm