Network Camera User Manual
3
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly
to avoid danger or property loss.
The precaution measure is divided into "Warnings" and "Cautions":
Warnings: Serious injury or death may be caused if any of these warnings are
neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are
neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
If camera fails to synchronize local time with that of the network, you need to set
up camera time manually. Visit the camera and enter system settings interface for
time setting.
Please adopt the power adapter which can meet the safety extra low voltage (SELV)
standard. And source with 12 VDC or 24 VAC (depending on models) according to
the IEC60950-1 and Limited Power Source standard.
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should conform
to all the local codes.
To Next Page
Loading...
Need help?
General
