Network Camera User Manual
50
Steps:
1. Enter VCA Resource configuration interface:
Configuration > System > System Settings > VCA Resource
2. Select a desired VCA combination. Available VCA combination varies according to
different camera models.
3. Click Save to save the settings. A reboot is required after setting the VCA Resource.
Notes:
• VCA combinations are mutually exclusive. When you activate one combination,
the others are hidden.
• Only certain camera models support the function.
6.2.7 Configuring Metadata Settings
Purpose:
Metadata is the raw data the camera collects before algorithm processing. Metadata
of intrusion detection, line crossing detection, region entrance detection, region
exiting detection, unattended baggage detection, object removal, queue
management and face capture can be uploaded. If enabled, the metadata of the
corresponding event are available for users to explore the possibility of various data
usage.
Steps:
1. Enter Metadata settings interface:
Configuration > System > System Settings > metadata Settings
2. Check the checkbox of the corresponding function to enable the metadata
function.
The metadata of the smart event includes the target ID, target coordinate and time
information.
The metadata of face capture includes the rule information, target ID, target
coordinate, face grading and time information. The camera detects the whole
image by default. If the region is configured in the face capture settings, the
camera detects the configured region.
To Next Page
Loading...
Need help?
General
