Network Camera User Manual
86
802.1X Settings
2. Check Enable IEEE 802.1X to enable the feature.
3. Configure the 802.1X settings, including Protocol, EAPOL version, User Name,
Password and Confirm.
Note: The EAPOL version must be identical with that of the router or the switch.
4. Enter the user name and password to access the server.
5. Click Save to finish the settings.
Note: A reboot is required for the settings to take effect.
7.2.9 Integration Protocol
Purpose:
If you need to access to the camera through the third party platform, you can enable
CGI function. And if you need to access to the device through ONVIF protocol, you can
configure ONVIF user in this interface. Refer to ONVIF standard for detailed
configuration rules.
Note: Integration protocol function varies according to different device model.
CGI
Check the Enable Hikvision_CGI checkbox and then select the authentication from
the drop-down list.
Note: Digest is the recommended authentication method.
ONVIF
Steps:
To Next Page
Loading...
Need help?
General
