Network Camera User Manual
62
Steps:
1. Click to select the user you want to delete and click Delete.
2. Click OK on the pop-up dialogue box to confirm the deletion.
Setting Simultaneous Login
Steps:
1. Click General.
2. Slide the slide bar to set the simultaneous login. If the number of the illegal
login attempts exceeds the set threshold, your access will be denied.
As Operator or User
Operator or user can modify password. Old password is required for this action.
6.5.2 Security Question
Purpose:
Security question is used to recover the admin password when admin user forgets the
password. Recovering the password via the security questions and via the email are
available.
Note: Only certain camera models support the function.
Set Account Security:
You can set the security questions during camera activation. Or you can set the
function at user management interface.
Security question setting is not cleared when you restore the camera (not to default).
Steps:
1. Enter setting interface:
Configuration > System > User Management > User Management
2. Click Account Security Settings.
3. Select questions and input answers.
4. Enter the E-mail address to receive the verification code for password recovery.
5. Click OK to save the settings.
Reset Admin Password:
To Next Page
Loading...
Need help?
General
