HIKVISION DS-2CD2786G2-IZS User Manual

Network Camera User Manual
48
DST Settings
2. Select the start time and the end time.
3. Select the DST Bias.
4. Click Save to activate the settings.
6.2.4 Configuring RS-232 Settings
The RS-232 port can be used in two ways:
 Console: Connect a computer to the camera through the serial port. Device
parameters can be configured by using software such as HyperTerminal. The serial
port parameters must be the same as the serial port parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
1. Enter RS-232 Port Setting interface: Configuration > System > System Settings >
RS-232.
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
RS-232 Settings
Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-

HIKVISION DS-2CD2786G2-IZS Specifications

General

Brand	HIKVISION
Model	DS-2CD2786G2-IZS
Category	Security Camera
Language	English