Menu button: Pressing the MENU button for 2 seconds, you can
enter the menu mode. The main menu displays on the screen.
Menu mode:
T/W button: You can use these buttons to move the cursor
up/down.
N/F button: You can use these buttons to switch options.
Menu button: You can use this button to enter or exit the submenu.
3.2 OSD Menu Configuration
Press the menu button for 2 seconds to enter the main menu.
Refer to the Figure 3-2.
The menu items are on the left. The options are on the right.
“…” means there is a submenu you can enter.
“---” means this menu is not available.