Network Speed Dome User Manual
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 5.2.1 and Section 5.2.4 for detailed information.
Record Triggered by Audio Exception Detection
If you select Audio Exception Detection, the video will be recorded when
the audio exception is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Audio Exception Detection interface. Please refer to Section
5.3.1 for detailed information.
Record Triggered by Other Smart Events
The smart events include Line Crossing Detection, Intrusion Detection,
Region Entrance Detection and Region Exiting Detection. If you select to
record by one type of the smart events, the video will be recorded when the
selected smart event is triggered. Besides configuring the recording schedule,
you have to configure the settings on the specific event settings interface.
Record Triggered by All Events
If you select All Events, the video will be recorded when any event is
detected.
(2) Select the timeline of a certain day, click and drag the left button of the
mouse to set the recording schedule (the start time and end time of the
recording task).
(3) After you set the scheduled task, you can click and copy the task to
other days (optional).
(4) After setting the record schedule, you can click a record segment to display
the segment record settings interface to edit the segment record parameters.
(optional)
Figure 5-4 Segment Record Settings
The time of each segment cannot be overlapped. Up to 8 segments can
be configured for each day.
6. Click to save the settings.
To Next Page
Loading...
Need help?
General
