Network Speed Dome User Manual
the detection target from the dropdown list. If Human is selected, only
human beings will be identified as detection objects and as well as Vehicle.
7. Click tab to enter the arming schedule setting interface. The
time schedule configuration is the same as the settings of the arming schedule for
motion detection. Refer to Step 2 in Section 5.2.1 Configuring Motion Detection.
8. Click tab to select the linkage method taken for the video loss
alarm, including Notify surveillance center, send email, upload to FTP, trigger
channel, smart tracking and trigger alarm output are selectable. Please Step 3 in
Section 5.2.1 Configuring Motion Detection.
9. Click to save the settings.
5.3.5 Region Entrance Detection
Purpose:
Region entrance detection function detects people, vehicle or other objects which
enter a pre-defined virtual region from the outside place, and some certain actions
can be taken when the alarm is triggered.
Steps:
1. Enter the Region Entrance Detection settings interface:
Configuration> Event > Smart Event> Region Entrance Detection
2. Check the checkbox of Enable to enable the Region Entrance Detection function.
To Next Page
Loading...
Need help?
General
