DS-2TD2xxx-xx/xx Thermal and Optical Bi-Spectrum Network Bullet Camera Quick Start Guide
QSG DS-2TD2xxx-xx/xx 071720NA 5
Power Supply
•
Make sure that the power has been disconnected before you wire, install, or disassemble the device.
•
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
12 VDC, 24 VAC , or PoE (802.3af) according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
•
Use a power adapter provided by a qualified manufacturer. Refer to the product specification for
detailed power requirements. It is recommended to provide an independent power adapter for each
device as adapter overload may cause overheating or a fire hazard.
Battery
•
DO NOT place the battery near a heating or fire source. Avoid direct sunlight.
•
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
•
For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
System Security
•
You acknowledge that the nature of the Internet provides for inherent security risks, and our company
shall not take any responsibilities for abnormal operation, privacy leakage, or other damages resulting
from cyber attack or hacker attack. However, our company will provide timely technical support if
required.
•
Please enforce protection for personal information and data security as the device may be confronted
with network security problems when it is connected to the Internet. Please contact us when the
device might incur network security risks.
•
Please understand that you have the responsibility to configure all the passwords and other security
settings about the device, and keep your user name and password.
Maintenance
•
Clean the lens with a soft and dry cloth or wiping paper to avoid scratching it.
•
If the product does not work properly, contact your dealer or the nearest service center. We shall not
assume any responsibility for problems caused by unauthorized repair or maintenance.
•
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
To Next Page
Loading...
Need help?
General
