DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 65
12.5 Reboot
You can reboot the device via a Web browser.
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Reboot.
12.6 Restore and Default
Restore and Default helps restore the device parameters to the default settings.
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Click Restore or Default according to your needs.
• Restore: Reset device parameters (except user information), IP parameters, and video format to the
default settings.
• Default: Reset all parameters to the factory defaults.
Note
Be careful when using this function. After resetting to the factory defaults, all the parameters are
reset to the default settings.
12.7 Upgrade
Before You Start
You need to obtain the correct upgrade package.
CAUTION DO NOT disconnect power during the process. The device reboots automatically after
upgrade.
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Choose one method to upgrade.
• Firmware: Locate the exact path of the upgrade file.
• Firmware Directory: Locate the directory the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
12.8 View Open Source Software License
1. Go to Configuration → System → System Settings → About Device, and click View Licenses.
To Next Page
Loading...
Need help?
General
