7.4.5 Configuring DPC Settings
DPC (Defective Pixel Correction) refers to the function that the camera can correct the defective
pixels on the LCD which are not performing as expected.
Figure 7-54 Defective Pixel Correction
Auto DPC Correction
Steps:
1. Select Auto from the modes.
2. Click to start correction.
Manual DPC Correction
Steps:
1. Select Manual from the modes.
2. Point to the defective pixel, and click to adjust the position.
3. Click to start correction.
4. (Optional) Click to cancel the correction.
This function varies depending on the models of speed dome.
7.4.6 Picture in Picture
Before you start:
Enter Configuration > System > System Maintenance > VCA Resource Type to select Picture in
To Next Page
Loading...
Need help?
General
