HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
125
Figure 7-62 RS-485 Settings
2. Set the RS-485 parameters and click to save the settings.
The Baud rate, PTZ Protocol and PTZ Address parameters of the speed dome should be exactly
the same as those of the control device.
7.5.2 Maintenance
Upgrade & Maintenance
 Rebooting the Positioning system
Steps:
1. Enter the Maintenance interface:
2. Configuration > System > Maintenance > Upgrade & Maintenance:
3. Click Reboot to reboot the network positioning system.
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click Restore or Default to restore the default settings.
Clicking Default to restores all the parameters to default settings including the IP address and
user information. Please use this button with caution.
Figure 7-63 Restore Default Settings
 Information Export

HIKVISION DS-2TD4166-25/V2 Specifications

General

Brand	HIKVISION
Model	DS-2TD4166-25/V2
Category	Security Camera
Language	English