HIKVISION DS-2TD4166-25/V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
39
information, please refer to Section Alarm Input.
 Record Triggered by Motion & Alarm: If you select Motion & Alarm, the video will be
recorded when the motion and alarm are triggered at the same time. Besides
configuring the recording schedule, you have to configure the settings on the Motion
Detection and Alarm Input settings interfaces.
 Record Triggered by Motion | Alarm: If you select Motion | Alarm, the video will be
recorded when the external alarm is triggered or the motion is detected. Besides
configuring the recording schedule, you have to configure the settings on the Motion
Detection and Alarm Input settings interfaces.
 Record Triggered by VCA events: If you select VCA, the video will be recorded when the
either of the VCA events is triggered. Besides configuring the recording schedule, you
have to configure the settings on the VCA interface.
VCA function varies depending on the models of speed dome.
 Record Triggered by Event: If you select to record by event, the video will be recorded
when any of the events is triggered.
6. Click to save the settings.
5.1.2 Configuring Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured picture
can be stored in the local storage or network storage.
Steps:
1. Enter the Snapshot settings interface:
Configuration > Storage > Schedule Settings > Capture
Figure 5-3 Snapshot Settings

HIKVISION DS-2TD4166-25/V2 Specifications

General

Brand	HIKVISION
Model	DS-2TD4166-25/V2
Category	Security Camera
Language	English