Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
75
11.5.14 Set Palette
You can select the palette mode to display the thermal grayscale image to colored image.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select the thermal channel.
3. Select a palette mode in Image Enhancement according to your need.
Result
The live view displays the image with palette.
11.5.15 Set Palette Range
The live view can display the palettes effect of the specified temperature range.
Select Manual or Auto from By Temp. Range drop down list.
Auto
The device detects the max. temperature and min. temperature of the scene automatically and
display image of the whole scene with palettes.
Manual
In this mode, you can enter the temperature upper limit and lower limit manually. And the live
view shows the palettes effect of the desired temperature section more detailed.
11.5.16 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
OFF
Disable this function.
Normal
Set the DDE level to control the details of the image. The higher the level is, the more details
shows, but the higher the noise is.
11.5.17 Brightness Sudden Change
When the brightness of target and the background is hugely different (the temperature difference
of target and background is huge), the system reduces the difference for viewing.
To Next Page
Loading...
Need help?
General
