Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
82
3. Set basic parameters.
The protocol version of the cloud video manager.
The IP address of the cloud video manager. It supports IPv4 address.
The port of the cloud video manager. 6001 is the default port and you
are not recommended to edit it.
The key to log in to the cloud video manager.
The key to encrypt the data stored in the cloud video manager.
The user name and password of the cloud video manager.
The ID of the picture storage region in the cloud video manager.
Make sure storage pool ID and the storage region ID are the same.
4. Click Test to test the configured settings.
5. Click Save.
12.2 Video Recording
This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.
12.2.1 Record Automatically
This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and
Alarm for details.
Steps
Note
The function varies according to different models.
1. Go to Configuration → Storage → Schedule Settings → Record Schedule.
2. Select channel No.
3. Check Enable.
4. Select a record type.
To Next Page
Loading...
Need help?
General
