HIKVISION DS-2XC6745G0-IZHS User Manual

5.3 Capture Conguraon
The device can capture the pictures manually or automacally and save them in congured saving
path. You can view and download the snapshots.
5.3.1 Capture Automacally
This funcon can capture pictures automacally during congured me periods.
Before You Start
If event-triggered capture is required, you should congure related linkage methods in event
sengs. Refer to Event and Alarm for event sengs.
Steps
1.
Go to Conguraon → Storage → Schedule Sengs → Picture Capture .
2.
Set capture schedule. Refer to
Set Arming Schedule for conguring schedule me.
Figure 5-1 Set Capture Schedule
3.
Set the capture type.
Scheduled
Capture a picture at the congured me interval.
Event-Triggered
Capture a picture when an event is triggered.
4.
Set the Format,
Resoluon, Quality, Interval, and Capture Number.
Note
The resoluon of the captured picture is the same as the resoluon of the captured picture
stream. You can select Stream Type in Advanced.
5.
Click Save.
5.3.2 Capture Manually
Steps
1.
Go to
Conguraon → Local .
Network Camera User Manual
34

HIKVISION DS-2XC6745G0-IZHS Specifications

General

Brand	HIKVISION
Model	DS-2XC6745G0-IZHS
Category	Security Camera
Language	English