Chapter 1 Startup
1.1 Acvate Your Device
For the rst-me access, you need to acvate the video recorder by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the video recorder via web browser,
SADP or client soware.
Before You Start
Power on your device.
Steps
1. Select a language.
2. Click Apply.
3. Input the same password in Password and
Conrm Password.
Warning
Strong Password recommended-We highly recommend you create a strong password of your
own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case leers, lower case leers, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, reseng the password monthly or weekly can beer
protect your product.
4.
Acvate network camera(s) connected to the device.
-
Check Use the Device Password to use the device password to acvate the inacve network
camera(s).
-
Enter a password in Camera Acvaon Password to acvate network camera(s).
5. Oponal: Set an email address for password reseng. When you forget your password, you can
reset it by email.
6. Click
Acvate.
Figure 1-1 Acvaon
Network Video Recorder User Manual
1