6.5.4 Congure Storage Mode
Congure HDD Groups
Mulple HDDs can be managed in groups. Video from specied channels can be recorded onto a
parcular HDD group through HDD sengs.
Steps
1. Go to Conguraon → Record → Storage Mode .
2. Select Mode as Group.
3. Select a group number.
4. Select IP cameras to record on the HDD group.
Figure 6-27 Group
5. Click Apply.
6. Restart the video recorder to acvate the new storage mode sengs.
7. Aer restart, go to Conguraon → Record → Storage .
8. Click of desired HDD to set the group.
9. Select a group number for the current HDD.
10. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
1. Go to
Conguraon → Record → Storage Mode .
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Network Video Recorder User Manual
68