EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7104NI-Q1

HIKVISION DS-7104NI-Q1 User Manual

HIKVISION DS-7104NI-Q1
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Congure Audio Warning
The audio warning enables the video recorder to trigger an audible beep when an alarm is
detected.
Steps
1. Go to
Conguraon → System → Live View → General .
2. Turn on Audio, and set Volume.
3. Go to Linkage
Acon interface of the alarm detecon.
4. Select Audio Warning alarm linkage acon.
Nofy
Surveillance Center
The video recorder can send an excepon or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the computer installed with client soware (e.g., iVMS-4200,
iVMS-5200).
Steps
1. Go to Conguraon → Network → General → More Sengs .
2. Set Alarm Host IP and Alarm Host Port.
3. Go to Linkage
Acon interface of the alarm detecon.
4. Select Nofy Surveillance Center.
Congure
Email Linkage
The video recorder can send an email with alarm informaon to a user or users when an alarm is
detected.
Steps
1. Go to
Conguraon → Network → Email .
2. Congure the sengs.
3. Go to Linkage Acon interface of the alarm detecon.
4. Select Send Email as alarm linkage acon.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1. Go to Linkage Acon interface of the alarm input or event detecon.
2. Click Trigger Alarm Output.
3. Select the alarm outputs to trigger.
4. Go to
Conguraon → Event → Normal Event → Alarm Output .
5. Select an alarm output item from the list. Refer to Alarm Output for details.
Network Video Recorder User Manual
62

Table of Contents

Other manuals for HIKVISION DS-7104NI-Q1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7104NI-Q1 and is the answer not in the manual?

HIKVISION DS-7104NI-Q1 Specifications

General IconGeneral
CertificationFCC 15 B, ANSI C63.4-2014 CE EN50130-4, EN 61000-3-2, EN 61000-3-3
Product colorBlack
Output current1 A
Output voltage48 V
Power consumption (typical)10 W
Total Power over Ethernet (PoE) budget36 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
HDD capacity0 GB
HDD interfaceSATA, SATA II, SATA III
Maximum storage capacity6 TB
Number of HDDs installed0
Number of HDDs supported1
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Power over Ethernet (PoE)Yes
Ethernet LAN (RJ-45) ports5
Supported network protocolsTCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Power over Ethernet (PoE) ports quantity4
Video codecsH.265+/H.265/ H.264+/H.264
Input bandwidth40 Mbit/s
Output bandwidth60 Mbit/s
Maximum resolution1920 x 1080 pixels
Video input channels4 channels
Supported resolutions1920 × 1080, 1600 × 1200, 1280 × 1024, 1280 × 720, 1024 × 768
Wi-FiNo
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width265 mm
Height48 mm
Weight1000 g

Related product manuals