Steps
1. Go to
Conguraon → Event .
2.
Congure the event detecon and select the cameras to trigger the recording when event
occurs.
3.
Go to
Conguraon → Record → Parameter .
4. Set the
connuous main stream/sub-stream recording parameters for the camera.
5. Go to
Conguraon → Record → Schedule .
6. Select recording type as Event.
Edit Schedule
Steps
1. Go to Conguraon → Record → Schedule .
Figure 6-24 Recording Schedule
Connuous
Connuous recording.
Event
Recording triggered by all event triggered alarm.
2. Select a camera in Camera No.
3. Turn on Enable.
4.
Congure the recording schedule.
1) Click Edit.
2) Select a day to
congure in Weekday.
3) To set an all-day recording schedule, check All Day and select schedule Type.
4) To set other schedules, uncheck All Day and set Start/End
me and schedule Type.
Note
Up to 8 periods can be congured for each day. And the me periods cannot be overlapped
with each other.
5) Click OK to save the sengs and go back to upper level menu.
Network Video Recorder User Manual
64