82
If you select “USB” mode, please make sure you connect one USB flash memory with DVR
and the firmware file is in it’s root directory.
Reboot after successfully upgrading, the system will use the new firmware.
6.3 Hard Disk Management
fig 6.5 Hard Disk setup
Check HDD work status
Capacity, Free space, Stand by or not, Normal status or not.
Format HDD
Before formatting stop all recording. After formatting, you must reboot DVR, otherwise
DVR will not work normally.
6.4 Stop Alarm Out
Clear the alarm output manually.
To Next Page
Loading...
Need help?
General