Digital Video Recorder User Manual
192
Step 3 Specify the start time and end time for searching the matched plate pictures.
Figure 11-6 Plate Search
Step 4 Select the country from the drop-down list for searching the location of the vehicle plate.
Step 5 Input the plate No. in the field for search.
Step 6 Click Search to start searching. The search results of detected vehicle plate pictures are
displayed in list or in chart.
Please refer to the Step 7 to Step 8 of Section 11.1 Face Search for the operation of the search
results.
11.4 People Counting
Purpose
The People Counting is used to calculate the number of people entered or left a certain configured
area and form in daily/weekly/monthly/annual reports for analysis.
For DS-7300/8100/9000HUHI-F/N series DVR, people counting is applicable to 1-ch analog camera.
The people counting function conflicts with line crossing detection, intrusion detection, sudden
scene change detection, face detection, vehicle detection and heat map. You can only enable one
function for the analog camera.
Step 1 Enter the People Counting interface.
Menu>VCA Search> People Counting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
