HIKVISION DS-7208HGHI-F1 User Manual

Digital Video Recorder User Manual
322
channels of DVR with 16-ch video inputs. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel, Chapter 5.1 Configuring Encoding
Parameters)
 For HQHI and DS-7200HUHI-F/N series DVR, if the 3 MP camera is connected to the channel
which supports up to 1080p signal input, it will switch to 1080p signal input. When the 3 MP
signal is switched to 1080p signal, the PAL will be switched to 1080p/25Hz, and the NTSC will
be switched to 1080p/30Hz. (Chapter 5.1 Configuring Encoding Parameters)
 When HDTVI, AHD, or HDCVI input is connected, the information including the resolutuion and
frame rate will be overlaid on the bottom right corner of the live view for 5 seconds. When
CVBS input is connected, the information such as NTSC or PAL will be overlaid on the bottom
right corner of the live view for 5 seconds. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel)
 When HDTVI, AHD, or HDCVI input is connected, you can view the information including the
input signal type, resolution and frame rate (e.g., HDTVI 720P25) on the Record Parameters
interface. When CVBS input is connected, you can view the information such as NTSC or PAL
on the Record Parameters interface. (Chapter 5.1 Configuring Encoding Parameters)
 If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server
and Alternate DNS Server. (Chapter 2.4.1 Configuring the Signal Input Wizard, Chapter 12.1
Configuring General Settings)
18.4.3 Version 3.4.70
Added:
New functions for DS-7100/7200HGHI-F and DS-7100/7200HQHI-F/N series DVR:
 There is no signal input configuration interface. Four kinds of analog signal inputs including
HDTVI, AHD, HDCVI and CVBS can be connected. The analog signal inputs can be recognized
automatically and each two of the analog signal inputs can be mixed randomly. (Chapter 2.4.1
Configuring the Signal Input Wizard, Chapter 2.7 Configuring the Signal Input Channel)
 When HDTVI, AHD, or HDCVI input is connected, the information including the resolutuion and
frame rate (e.g., 720P25) will be overlaid on the bottom right corner of the live view for 5
seconds. When CVBS input is connected, the information such as NTSC or PAL will be overlaid
on the bottom right corner of the live view for 5 seconds. When there is no video signal of the
analog channel, the connectable video signal type message will not be displayed on the screen.
(Chapter 2.4.1 Configuring the Signal Input Wizard, Chapter 2.7 Configuring the Signal Input
Channel)
 When HDTVI, AHD, or HDCVI input is connected, you can view the information including the
input signal type, resolution and frame rate (e.g., HDTVI 720P25) on the Record Parameters
interface. When CVBS input is connected, you can view the information such as NTSC or PAL
on the Record Parameters interface. (Chapter 5.1 Configuring Encoding Parameters)

HIKVISION DS-7208HGHI-F1 Specifications

General

Product color	Black
Rack capacity	1U
Channels quantity	8 channels
Remote control type	128
Video capturing speed	30 fps
Audio formats supported	G.711
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+
Playback resolutions supported	1080p lite
BNC input ports	8
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	12 W
Storage temperature (T-T)	10 - 90 °C
Operating temperature (T-T)	-10 - 55 °C

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	260 x 222 x 45 mm