HIKVISION DS-7332HGHI-SH User Manual

User Manual of Digital Video Recorder
101
/
Scaling up/down
time bar
Process bar Full Screen
Exit Video type bar Normal playback
Adjust the audio
volume


 The indicates the start time and end time of the record
files.


 represents normal recording (manual or schedule); represents event recording (motion, alarm,
motion | alarm, motion & alarm).


 Playback progress bar: use the mouse to click any point of the progress bar to locate special frames.
6.1.3 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (motion detection, alarm
input or VCA). Channel switch is supported.
 Playback by alarm input search is not supported by DS-7100 and DS-7200HGHI series DVR.
 DS-7100 does not support VCA type.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Click and select to enter the Event Playback interface.
3. Select Alarm Input , Motion , Line Crossing Detection , Intrusion Detection as the event type, and
specify the start time and end time for search.

HIKVISION DS-7332HGHI-SH Specifications

General

HDD capacity	18000 GB
HDD interface	Serial ATA
Number of HDDs supported	4
Product color	Black
Channels quantity	32 channels
Maximum frame rate	30 fps
Video compression formats	H.264
Playback resolutions supported	1920x1080, 1280x1024, 1280x720, 1024x768, 704x576, 704x480
BNC input ports	32
USB 2.0 ports quantity	3
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, EZVIZ Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS
Power requirements	100-240V AC, 47 - 63Hz
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	445 x 390 x 70 mm