User Manual of Digital Video Recorder
161
9.4 Configuring Network Detection
Purpose:
You can obtain network connecting status of DVR through the network detection function, including network
delay, packet loss, etc.
9.4.1
Testing Network Delay and Packet Loss
Steps:
1.
Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2.
Click the
Network Detection
tab to enter the Network Detection menu.
Figure 9. 29 Network Detection Interface
3.
Select a NIC to test network delay and packet loss.
4.
Enter the destination address in the text field of
Destination Address
.
5.
Click the
Test
button to start testing network delay and packet loss.
9.4.2
Exporting Network Packet
Purpose:
By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk, SATA
and other local backup devices.
Steps:
1.
Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
2.
Click the
Network Detection
tab to enter the Network Detection interface.
3.
Select the backup device from the dropdown list of Device Name.
Click the
Refresh
button if the connected local backup device cannot be displayed. When it fails to detect the
backup device, please check whether it is compatible with the DVR. You can format the backup device if the
format is incorrect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
