198
User Manual of Digital Video Recorder
(2)
Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration
for the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of device.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera Management: Enabling and disabling analog camera (s). Adding, deleting and
editing of network camera (s). This function is supported by HDVR series.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown /Reboot: Shutting down or rebooting the device.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the device.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
•
Remote Camera Management: Remotely enabling and disabling analog camera (s), and adding,
deleting and editing of network camera (s). This function is supported by HDVR series.
•
Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
•
Remote Video Output Control: Sending remote control panel signal.
•
Two-way Audio: Realizing two-way radio between the remote client and the device.
•
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
•
Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearing I/O alarm output.
•
Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.
Camera Configuration
•
Remote Live View: Remotely viewing live video of the selected camera (s).
•
Local Manual Operation: Locally starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
•
Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
•
Local Playback: Locally playing back recorded files of the selected camera (s).
•
Remote Playback: Remotely playing back recorded files of the selected camera (s).
•
Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
•
Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
•
Local Video Export: Locally exporting recorded files of the selected camera (s).
Local Camera Management is provided for the IP cameras only.
(3)
Click
OK
to save the settings and exit.
13.5.2
Deleting a User
Steps:
1.
Enter the User Management interface.
Menu >Configuration>User
2.
Select the user to be deleted from the list, as shown in Figure 13. 9.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
