User Manual of Network Video Recorder
176
40Mbps and the local menu operation will be affected. It is recommended to disable this function after
finishing the remote downloading of record files.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 11. 15.
3. Check the checkbox of Enable High-speed Download. And click the OK button in the pop-up message box
to confirm the settings.
Figure 11. 31 High-speed Download Settings Menu
Figure 11. 32 Message Box of High-speed Download
4. Click Apply button to save and exit the interface.
11.2.13 Configuring Virtual Host
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 11. 33.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 11. 33 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
To Next Page
Loading...
Need help?
General
