HIKVISION DS-KD9203 Series User Manual

Chapter 8 Conguraon via Client Soware
8.1 Edit Network Parameters
To operate and congure the device via LAN (Local Area Network), you need connect the device in
the same subnet with your PC. You can edit network parameters via iVMS-4200 client soware.
Steps
1.
Select an online acvated device and click the Modify Nenfo.
2.
Edit the device IP address and gateway address to the same subnet with your computer.
3.
Enter the password and click OK to save the network parameters
modicaon.
Note
●
The default port No. is 8000.
●
The default IP address of the door staon is 192.0.0.65.
●
Aer eding the network parameters of device, you should add the devices to the device list
again.
8.2 Add Device
You should add device to the soware so as to congure the device remotely.
8.2.1 Add Online Device
Before You Start
Make sure the device to be added is in the same subnet with your computer. Otherwise, please
edit network parameters rst.
Steps
1.
Click Online Device to select an
acve online device.
2.
Click Add.
3.
Enter corresponding informaon, and click Add.
Video Intercom Face Recognion Door Staon User Manual
47

HIKVISION DS-KD9203 Series Specifications

General

Brand	HIKVISION
Model	DS-KD9203 Series
Category	Intercom System
Language	English