HIKVISION DS-KD9203 Series User Manual

8.2.2 Add Device by IP Address
Steps
1.
Click +Add to pop up the adding devices dialog box.
2.
Select IP/Domain as Adding Mode.
3.
Enter corresponding
informaon.
4.
Click Add.
8.2.3 Add Device by IP Segment
You can add many devices at once whose IP addresses are among the IP segment.
Steps
1.
Click +Add to pop up the dialog box.
2.
Select IP Segment as Adding Mode.
3.
Enter corresponding
informaon, and click Add.
8.3 Remote
Conguraon
Select the device, click to congure the parameters remotely.
8.4 Device Management
Device management includes device acvaon, adding device, eding device, and deleng device,
and so on.
Aer running the iVMS-4200, video intercom devices should be added to the client soware for
remote
conguraon and management.
8.5
Organizaon Management
On the main page of the Client Soware, click PersonalManagement to enter the
conguraon page.
8.5.1 Add
Organizaon
Steps
1.
In the organizaon list on the le, click +Add.
2.
Enter the
Organizaon Name as desired.
3.
Click OK to save the adding.
4.
Oponal: You can add mulple levels of organizaons according to the actual needs.
Video Intercom Face Recognion Door Staon User Manual
49

HIKVISION DS-KD9203 Series Specifications

General

Brand	HIKVISION
Model	DS-KD9203 Series
Category	Intercom System
Language	English