HIKVISION DS-KH8301-WT User Manual

Video Intercom Indoor Station·User Manual
71
10.2.5 Arming Status
Purpose:
Arming status displays the arming situation of your room from 4 types: sleeping, custom,
outdoor, and indoor. You can arm/disarm the room manually, and when the arming
status is enabled, the arming status will display on the main interface.
Steps:
1. Press the Arming Status tab to display the arming status interface.
2. Press the arming mode (Indoor, Sleeping, Outdoor, or Custom) tab to pop up the
arm/disarm password authentication dialogue box.
3. Enter the arm/disarm password to enable the arming status.
Figure 9-6 Arming Status Menu
 Only one mode of arming can be set at one time. When you set another mode of
arming status, the former one is disarmed automatically.
 If enabling the arming status successfully, you can hear a voice prompt “armed”, and
the corresponding arming status will display on the main interface.
 If you want to disarm, press the Disarm tab and enter the arm/disarm password to
disable the arming status successfully with a voice prompt “disarmed”.
 The DS-KH6201(L) indoor station does not support this function.
10.3 Settings
Purpose:
On the settings interface, you can set passwords (admin password, duress code, unlock
password, and arm/disarm password), set the device sound, set no disturbing schedule,
set the arming mode and zone, perform the system maintenance, set the configuration
settings, and view the device information.

HIKVISION DS-KH8301-WT Specifications

General

Color	Yes
Video codecs	H.264
Certification	FCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Connectivity technology	Wired
Sustainability certificates	RoHS
Voice codecs	G.711u
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Proper use	Indoor
Control type	Touch
Product color	White
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, RTSP
Outdoor unit included	No
Operating system installed	Linux
Operating relative humidity (H-H)	10 - 90 %
Main monitor station operating temperature (T-T)	-10 - 55 °C
Indoor unit power type	AC/DC
Power consumption (typical)	10 W
Megapixel	0.3 MP
Sensor type	CMOS
Maximum frame rate	30 fps
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB

Weight and Dimensions

Depth	26 mm
Width	217 mm
Height	142 mm