Digital Video Recorder User Manual
122
Click button to set up handling method of video loss.
Step 4 Set arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Or you
can click the Copy button to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
Figure 8-13 Set Arming Schedule of Video Loss
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
Step 5 Select Linkage Action tab to set up alarm response action of video loss (please refer to
Chapter 8.8 Setting Alarm Response Actions).
Step 6 Click the OK button to complete the video loss settings of the channel.
Repeat the above steps to finish settings of other channels, or click the Copy button copy the
above settings to them.
8.5 Detecting Video Tampering
Purpose
Trigger alarm when the lens is covered and take alarm response action(s).
Step 1 Go to Menu > Camera > Video Tampering Detection.
To Next Page
Loading...
Need help?
General