Digital Video Recorder User Manual
192
14.5 Upgrading System
Purpose
The firmware on your DVR can be upgraded by local backup device or remote FTP server.
14.5.1 Upgrading by Local Backup Device
Step 1 Connect your DVR with a local backup device where the update firmware file is located.
Step 2 Go to Menu > Maintenance > Upgrade > Local Upgrade.
Figure 14-7 Local Upgrade Interface
Step 3 Select the update file from the backup device.
Step 4 Click Upgrade to start upgrading.
Step 5 After the upgrading is completed, reboot the DVR to activate the new firmware.
14.5.2 Upgrading by FTP
Before you start
Configure PC (running FTP server) and DVR to the same Local Area Network. Run the 3
rd
-party
TFTP software on the PC and copy the firmware into the root directory of TFTP.
Step 1 Go to Menu > Maintenance > Upgrade > FTP.
Figure 14-8 FTP Upgrade Interface
Step 2 Enter the FTP Server Address in the text field.
Step 3 Click the Upgrade button to start upgrading.
Step 4 After the upgrading is completed, reboot the DVR to activate the new firmware.
14.6 Upgrading Camera
Purpose
You can upgrade multiple connected analog cameras supporting Turbo HD or AHD signal
simultaneously with DVR.
Step 1 Go to Menu > Maintenance > Upgrade > Camera Upgrade.
To Next Page
Loading...
Need help?
General