Digital Video Recorder User Manual
94
Figure 6-8 Interface of Playback by Event
Pre-play and post-play can be configured for the playback of event triggered record files.
Pre-play: The time you set to play back before the event. For example, when an alarm triggered the
recording at 10:00, if you set the pre-play time as 5 seconds, the video plays back from 9:59:55.
Post-play: The time you set to play back after the event. For example, when an alarm triggered the
recording ends at 11:00, if you set the post-play time as 5 seconds, the video plays back till
11:00:05.
Step 7 You can click or button to select the previous or next event. Please refer to Table 6-1
for the description of buttons on the toolbar.
6.1.4 Playing Back by Tag
Purpose
Video tag allows you to record related information like people and location of a certain time point
during playback. You are also allowed to use video tag(s) to search for record files and position
time point.
Before playing back by tag
Step 1 Go to Menu > Playback.
Step 2 Search and play back the record file(s). Refer to Chapter 6.1.2 Playing Back by Normal
Search for the detailed information about searching and playback of the record files.
To Next Page
Loading...
Need help?
General