HIKVISION HWN-2108MH-8P User Manual

Network Video Recorder User Manual
131
Setting Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
Enter Alarm Settings of System Configuration and select an alarm input.
Menu> Configuration> Alarm
Select Alarm Input tab to enter Alarm Input Settings interface.
Alarm Status Interface of System Configuration
Set up the handling action of the selected alarm input.
Check the Enable checkbox and click Settings button to set up its alarm response actions.
Alarm Input Setup Interface
(Optional) Enable the one-key disarming for local alarm input 1 (Local<-1).
1) Check the checkbox of Enable One-Key Disarming.
2) Click the Settings button to enter the linkage action settings interface.
3) Select the alarm linkage action (s) you want to disarm for the local alarm input1. The selected linkage
actions include the Full Screen Monitoring, Audible Warning, Notify Surveillance Center, Send Email
and Trigger Alarm Output.

HIKVISION HWN-2108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-2108MH-8P
Category	Network Hardware
Language	English